1 2 3
Contact

Evershiner Lighting Co.,Ltd

Tel:+86-755-28448035

Mobile:+86-13418540001

MSN:annie860505@hotmail.com

Email:annielan@ledgrb.com

Skype:annie860505

Home > Products > NEW product
Detail

NAME: 24-Key infrared LED controller
MODEL: CA12 AI24ADDRGB

Summarization
24-key infrared LED RGB controller adopts the advanced micro control unit, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; At the same time, it has many advantages such as convenient connection ,simplicity to use and others. According to the actual need of customers, it can carry out jumpy changing, gradual changing and other effects of change. Total 24 modes for your choice.
 
Technical parameters 
  ● Working temperature: -20-60 ℃ 
  ● Voltage supply: DC5V, 12V, 24V <optional> (for orders specify voltage) 
  ● Output: 3 channels 
  ● Connecting mode: common anode or common cathode
  ● External dimension: L49.5ΧW34.5ΧH22 mm
  ● Net weight: 50g
  ● Gross weight: 71g
  ● Static power consumption: <1 W
  ● Output current: <2 A (each channel)
  ● Output power: 5 V: <30W, 12V: <72W, 24V: <144W

External Dimension
Controller dimension



Direction for use
Connect the load wire at first, following by the power wire; Please ensure short circuit can’t occur between connecting wire before you turn on the power;

Standard color changes as follows

Brightness +( 16 in all )

Brightness-( 16 in all )

Off

On

Static red

Static green

Static blue

Static white

Static orange

Static pea green

Static dark blue

7 color jumpy change

Static dark yellow

Static cyan

Static brown

All fade out & fade in

Static yellow

Static light blue

Static pink

7 color fade change

Static straw yellow

Static sky blue

Static purple

3 base color jumpy


 

Direction:
①When switching to dynamic modes the button of “Brightness +”/ “Brightness -” means the speed of light change is up/ down, there are 100 step in all. 
②The FADE and SMOOTH all have two modes, which are “3 base colors jumpy/7 colors jumpy” and “3 base colors fade/7 colors fade”, you can press one more time to change it.
③when press FADE and SMOOTH, the “FLASH” and “STROBE” key are invalid.
④When in the static modes, press the “FLASH” /“STROBE” key, the mode will change to be “ the single color Stroboflash/ Gradual changing”.
 

Connecting drawing

 

TEL:13418540001 0755-28448035 EMAIL:annielan@ledgrb.com